SEM1500/P Temperature Transmitter

SEM1500/P Temperature Transmitter

PT100 Transmitter, 2, 3, and 4 Wire
The SEM 1500/P series are DIN rail mounted transmitters designed to connect to Pt-100 temperature sensors and convert them into a standard 4-20mA transmission signal. Each supplied unit is factory-set to one of 6 standard ranges or can be user-configured to any range from -100°C to +600°C, with a minimum span of 25°C.

High precision is achieved by using an active, three or four-wire bridge that effectively eliminates errors due to connection cables and sensor lead resistance.

The compact unit (only 12.5mm wide) allows for installation in more confined spaces than before.


Specifications: @20°C
Input Pt100: Platinum resistance BS EN60751, DIN43760, other on request
SEM1503/P: 2 or 3 wire
SEM1504/P: 2 or 4 wire
Burn-out: Upscale on any wire break
Excitation Current: SEM1503/P 2mA nominal, SEM1504/P 1mA nominal
Output
Type: Passive 2-wire current output
Range: 4-20mA (30mA max)
Protection: Reverse connection and overvoltage protected
General
Supply: 10-30V DC
Load: 700 ohms @24V
Thermal Stability: 100ppm/°C
Ripple: <40μA/V (50Hz ripple rejection >1V)
Response Time: 100ms to 70% of final value
Temperature: Ambient 0-50°C
Relative Humidity: 10-95% non-condensing
Construction
Housing Material: Polyamide (grey)
Flammability: UL94-V0, VDE0304 Part 3, Category IIIA
Mounting: "Top Hat" rail DIN EN50022-35
Protection: IP20
Termination: Fixed screw terminals
Cable Size: 4mm solid / 2.5mm stranded